Installation Requirements - AVM FRITZ!Card USB Installation Instructions Manual

1.3 Installation Requirements

To operate FRITZ!Card on your computer, the following re-
quirements must be met:
an ISDN access with the DSS1 (Euro ISDN) D-channel
protocol must be installed.
a computer with an Intel or AMD processor and hard-
ware suitable for the operating system.
computer with a USB port
operating system Microsoft Windows XP, Windows Me,
Windows 2000 or Windows 98
If
SoftCompression X75/V42bis are to be used, a
computer with a Pentium processor and 16 MB RAM is
recommended.
To operate FRITZ!fon or any other telephony software, a
full-duplex sound card and equipment for speech input
and output over the sound card are required (headset,
for instance).
The "Stand-by" and "Remote Wake Up" functions are
available with the operating systems Windows XP,
Windows Me and Windows 2000 if your computer is ACPI-
capable and the CAPI driver is installed. For more
information about the requirements for ACPI, see the
section "Does the Computer Support ACPI?" on page 35.
If all of these requirements are met, FRITZ!Card USB v2.1 can
be installed on your system.
FRITZ!Card USB v2.1 and the software supplied with it were
developed for individual workstations, not for networks.
They are designed to connect only one single computer with
ISDN.
the functions
FRITZ!Card – 1 Welcome to FRITZ!Card
Installation Requirements
CAPI SoftFax G3 and CAPI
7