Installing Fritz!Card Usb V2.1; Connecting Fritz!Card Usb V2.1 To The Computer And Isdn; What Is Installed - AVM FRITZ!Card USB Installation Instructions Manual

Installing FRITZ!Card USB v2.1

2 Installing FRITZ!Card USB v2.1
2.1 Connecting FRITZ!Card USB v2.1 to

2.2 What Is Installed?

8 FRITZ!Card – 2 Installing FRITZ!Card USB v2.1
FRITZ!Card can be installed in the operating systems
Windows XP, Windows Me, Windows 2000 and Windows 98.
In some operating systems the display of menus and folders
can be changed. The following instructions are based on the
standard installation of each operating system.
the Computer and ISDN
1. Switch on your computer.
2. Connect the FRITZ!Card USB v2.1 to the ISDN socket
first. Remove the enclosed ISDN cable from the pack-
age. The ISDN cable has identical plugs fitted to both
ends. Plug one end into the ISDN socket and the other
into the ISDN socket on the back plate of
FRITZ!Card USB v2.1.
3. Remove the enclosed USB cable from the package. The
USB cable has two different plugs: one that is flat and
square (known as the Series-A connector) and one that
is rectangular (known as the Series-B connector).
4. Insert the flat "series A" plug in your computer's USB
port.
5. Then insert the square connector into the USB socket of
FRITZ!Card USB v2.1.
Now the software components of FRITZ!Card can be in-
stalled. Read the following sections for instructions.
During the initial installation, the installation program sets
up the following software components:
the driver software for FRITZ!Card USB v2.1