Installing The Driver Software In Windows Xp - AVM FRITZ!Card USB Installation Instructions Manual

The exact steps taken to install the driver software dif-
fer among the operating systems Windows XP, Me,
2000 and 98. Read the section that describes the driver
software installation for your operating system.
the FRITZ! communications software (please see "The
Many Facets of FRITZ!" on page 22 and the FRITZ! soft-
ware manual)
the AVM ISDN CAPI Port Driver (please see the section
"Into the Internet with AVM System Drivers" on page 25)
If you already have individual software components such as
FRITZ! installed, read the instructions in section "Installing
Individual Software Components" on page 17.
In the section "Where to Find What After Installation" on
page 16 you will find information about the locations of the
various software components on your computer after instal-
lation.
Once installation is complete, additional AVM system drivers
and software may be installed for online services (see the
section "FRITZ!: Internet and ISDN Software" from page 21).
2.3 Installing the Driver Software in
Windows XP
Once you have connected FRITZ!Card USB v2.1 to the com-
puter, the Plug & Play mechanism of Windows XP recognizes
the ISDN-Controller automatically. The Found New Hardware
assistant is started.
Insert the FRITZ!Card CD and follow the instructions on the
screen. Note the following:
1. When asked: "What do you want the wizard to do?", se-
lect the option "Install the software automatically
(Recommended)" and confirm with "Next".
2. In the next window, select the option "Install from a list
or specific location (Recommended)" and confirm by
clicking "Next".

Installing the Driver Software in Windows XP

FRITZ!Card – 2 Installing FRITZ!Card USB v2.1 9