Watching a Presentation (WebShare)
WebShare allows audience members to view a presentation on their computers or mobile
devices using a web browser. The presenter may broadcast the presentation so that the
image shown on the display can be viewed remotely.
NOTE:
Audience members must follow these steps to watch a presentation:
1.
2.
3.
•
WebShare must be enabled on the client software or mobile app in order for the
presentation to be viewed remotely by other users.
•
Each user connected through WebShare adds to the wireless bandwidth of the
ShareLink 200. It is recommended that the device be connected to an Ethernet
network or bridged to a router for best performance.
Open a web browser on the mobile device or computer and connect to the IP address
of the ShareLink 200.
On the landing page, click Watch Presentation. The presentation page (figure 29)
opens in the web browser.
Click the 1:1 button ( 4 ) to watch the presentation.
1 1
2 2
3 3
Figure 29.
Presentation Page
1
Home — Click to go to the ShareLink 200 landing page.
2
Pause — Click to pause the presentation.
3
Save — Click to save the slide being presented.
4
1:1 — Click to watch the presentation.
5
Fit Window — Click to enlarge the presentation screen to the size of the browser
window.
6
Refresh — Click to refresh the presentation, if necessary.
4 4
5 5
6 6
ShareLink 200 • Using the Embedded Web Pages
28
Need help?
Do you have a question about the ShareLink 200 and is the answer not in the manual?
Questions and answers