Connecting To The Sharelink 200 Receiver - Extron electronics ShareLink 200 User Manual

Connecting to the ShareLink 200 Receiver

Use the software to connect to the ShareLink 200 receiver as follows:
1. Open the ShareLink 200 software. The software searches for available receivers
- PSU users must connect manually with the IP address shown on the screen.
network
158.136.28.9
NOTE: The Other Receivers button allows Wi-Fi users to search and connect
- Use the four digit code on the screen in the classroom
to ShareLink 200 receivers on other Wi-Fi networks (see
next page for instructions).
Figure 8.
2. Select your ShareLink 200 device from the Receiver Name section and click
Connect.
NOTE: The receiver name is shown on the standby screen. If your ShareLink 200
unit is not listed, click the refresh button. If the device still does not appear, click
Manual and enter the receiver IP address manually.
3. If the login window appears, enter the login code into the Code field of the Login
window and click Connect.
NOTE: The login code is shown on the standby screen (see
Figure 9.
NOTE:
a designated receiver (see
and the Choose a Receiver window opens.
Choose a Receiver Window
Login Window
A file can be created for the ShareLink 200 software to connect automatically to
Creating a Room File
Other Receivers
figure 4
on page 16).
ShareLink 200 • Operation Using a Computer
on your
on the
on page 5).
10