Table of Contents
Advertisement
b The LED flashes white quickly at regular inter-
vals if the encryption process (pairing) is being
performed in the dLAN pro network.
b The LED flashes white at irregular intervals if
the dLAN pro 1200+ WiFi ac is in PowerSave
mode.
b The LED flashes red at regular intervals if the
transmission rate of the dLAN pro 1200+ WiFi ac
is not in the optimum range. For information on
improving the transmission rate, refer to Chapter
5.1 Bandwidth optimization.
3.3.2 Wi-Fi button
The Wi-Fi button controls the following Wi-Fi
functions:
Wi-Fi On/Off:
b In the factory default settings, the Wi-Fi set-
ting is already enabled and the Wi-Fi encryption
is set to WPA2. The default WiFi key for the initial
installation of the dLAN pro 1200+ WiFi ac is the
device's WiFi key. You will find the unique key on
the label on the back of the housing.
Fig. 6
Note
the
WiFi key
dLAN pro 1200+ WiFi ac before the network-
ing procedure. You will find the device's
unique key (WiFi key) on the label on the back
of the housing.
In
order
to
dLAN pro 1200+ WiFi ac with your laptop
later via Wi-Fi, tablet or smartphone, enter the
noted WiFi key as the network security key.
b In order to switch Wi-Fi off, press and hold the
Wi-Fi button longer than 3 seconds.
devolo dLAN pro 1200+ WiFi ac
Initial use 23
of
the
connect
the
Hide quick links:
Advertisement
Table of Contents
