Table of Contents
Advertisement
50 Network configuration
devolo dLAN pro 1200+ WiFi ac
Channel selection
In this setting (Shared use of the frequency bands), the
default setting Auto is selected in the channel selec-
tion and cannot be changed.
The dLAN pro 1200+ WiFi ac regularly and automati-
cally executes the channel selection in this setting. In
other words, if the last connected station logs out, a
search for a suitable channel is carried out immediate-
ly. If no stations are connected, the device automatical-
ly selects a channel every 15 minutes.
Pay attention to the various LED be-
haviours of the Wi-Fi LED. For more
information, refer to chapter 3.3.2
Wi-Fi button.
Lowering the transmitting power
In this section, you can adjust the Wi-Fi transmission
level to your needs. I.e. if you do not require a large
range. For example, if you are in the same room as the
dLAN pro 1200+ WiFi ac, select low power.
RADIUS server
In addition to the WPA/WPA2 encryption key, the
dLAN pro 1200+ WiFi ac supports the WPA/WPA2
Enterprise Mode (see Security (encryption). In
addition to the access point, there is also the
RADIUS server in Enterprise mode. As a central
authentication
server,
it
assumes
administration for multiple access points.
If you would like to use a RADIUS server, designate
it by assigning a name or IP, RADIUS port and RADI-
US key.
Access point – Settings
The dLAN pro 1200+ WiFi ac supports up to 7 access
points (Multi-SSID), each with two frequency bands
of 2.4 GHz and 5 GHz, i.e. you can use the
dLAN pro 1200+ WiFi ac to operate 14 Wi-Fi net-
works.
Click Edit on the respective access points to arrive at
the security settings.
For security reasons, you can also
view and edit all access point set-
tings of the device when the Wi-Fi
function is deactivated (see Wi-Fi
off). This lets you configure all of your
Wi-Fi settings at your own pace be-
fore re-activating the Wi-Fi function.
the
user
Hide quick links:
Advertisement
Table of Contents
