Vlan Port Settings - Devolo dLAN pro 1200+ WiFi ac Manual

64 Network configuration
devolo dLAN pro 1200+ WiFi ac

4.6.3 VLAN port settings

The VLAN port settings are configured here.
The existing ports of the dLAN pro 1200+ WiFi ac are
listed in the left column.
The configured VLANs are listed in the row header with
their respective VLAN ID. The ports can be assigned to
the VLANs via the matrix.
Multiple VLANs can be assigned to all ports.
For detailed information about this, refer to
the online FAQs
www.devolo.com/en/business-solutions.
The behaviour of the port is configured via the columns
Tx Force Untag, Rx Tagged only, the Port VLAN ID
(PVID) and the Default Priority. Depending on the
setting, the logical following dependencies are provid-
ed:
Ethernet and dLAN
b Tx Force Untag not activated = outgoing
frames from this port are, in relation to tagging,
sent unchanged.
b Rx Tagged Only activated = only incoming
tagged frames are received; PVID and Default
Priority cannot be defined.
b Rx Tagged Only not activated = all incoming
frames are received. PVID and Default Priority
can be defined.
b Tx Force Untag and Rx Tagged Only activated
= PVID and Default Priority cannot be
defined.
on our website