Starter Kit And Single Kit-Setting Up A New Dlan Pro Network - Devolo dLAN pro 1200+ WiFi ac Manual

dLAN pro 1200+ WiFi ac either manually or using
the WiFi Clone function on the configuration
interface.
More information on the function and activa-
tion of WiFi Clone can be found in Chapter
4.4.2 Network settings
Settings.
To integrate
dLAN pro 1200+ WiFi ac into an ex-
isting Wi-Fi network with dLAN pro
wireless devices of the 500 series
(e.g. dLAN pro 500 Wireless+), you
have to transfer the settings of your
existing Wi-Fi configuration manually
to the configuration interface of the
dLAN pro 1200+ WiFi ac.
For more information on the configuration in-
terface, refer to Chapter 4 Network configu-
ration.
3.4.2 Starter Kit and Single Kit—Setting
up a new dLAN pro network
Connect the dLAN pro 1200+ to your Internet
access device's network jack.
Plug the dLAN pro 1200+ WiFi ac into a wall
socket. The device is ready to operate once the
indicator light of the encryption button with the
home icon turns white (after approximately 45
seconds).
Access point –
To disconnect the device from the
mains supply, unplug the device from
the electrical socket. The power out-
the
let and all connected network devic-
es should be easily accessible so that
you can pull the mains plug quickly if
needed.
Connecting the dLAN pro 1200+ and a
dLAN pro 1200+ WiFi ac as a dLAN pro network
Before you can use the device in a dLAN pro network,
first you have to connect it as a network. This is accom-
plished by using a shared dLAN password. This forms
a delimited dLAN pro network. Shared use of the dLAN
password serves as access control to the dLAN pro net-
work as well as the encryption, and thereby the inter-
ception protection, of the transmitted data.
The dLAN password can be set in different ways:
dLAN pro network encryption at the touch of a
button
Initial use 27
devolo dLAN pro 1200+ WiFi ac