Module Replacement Procedure
9.
Wait until the User Name is displayed on the console. From this point, follow the
Nortel SCS Task Based Guides (TBG) for configuration of the SCS software. For SCS
installation on a single server, see page 16 of the "Initial Installation – Single SCS
Server" TBG. For SCS High Availability (HA) installation see page 22 of the
"Configuring the SCS with High Availability (HA) – Dual Server" TBG.
Note:
Version 5.4
Figure 3-4: BIOS Setup – Save Changes and Exit
Prior to SCS installation and configuration, you will need to gather important
network information such as HA or non-HA deployment, server IP address,
DNS, and DHCP. See the worksheets and checklists in the Task Based
Guides described above.
19
3. Nortel SCS Installation
October 2009