Figure 2-3: Proxy & Registration Parameters - AudioCodes MEDIANT 1000 Configuration Manual

Module Replacement Procedure
3. Open the Proxy & Registration page (Configuration Tab: Protocol Configuration >
Protocol Definition > Proxy & Registration).
4. Change the following parameters:
•
Use Default Proxy:
•
Enable Registration:
•
Gateway Name:
•
Registration Mode:
Additional option:
•
Registration Time:
Version 5.4
Figure 2-3: Proxy & Registration Parameters
"Yes"
"Enable"
SCS IP Address (e.g., 10.15.7.15)
"per Endpoint"
"3600"
13
2. Gateway Setup Notes
October 2009