Figure 2-2: Sip General Parameters - AudioCodes MEDIANT 1000 Configuration Manual

To configure the AudioCodes' gateway, using the Web interface:
1. Open
Configuration > Protocol Definition > SIP General Parameters).
2. Change the following parameters:
•
Fax Signaling Method:
Additional options:
•
Enable Early Media:
•
Channel Select Mode:
Module Replacement Procedure
the SIP General Parameters

Figure 2-2: SIP General Parameters

page (Configuration
"T.38 Relay"
"Enable"
"By Dest Phone Number"
12
Mediant 1000
Tab: Protocol
Document #: LTRT-12601