Figure 2-8: Authentication - AudioCodes MEDIANT 1000 Configuration Manual

13. Add / Select the following parameters:
•
Module:
•
Channels:
•
Phone Number:
14. Open the Trunk Settings page (Configuration Tab: Protocol Configuration >
Endpoint Settings > Authentication).
15. Add the following parameters:
•
User Name: Enter the FXS port extension based on the 'Gateway Port'. (e.g.,
500)
•
Password: Enter the extension Password.
Module Replacement Procedure
Select the FXS module from the drop-down list.
Select the FXS Port number. (e.g., "1")
Telephone extension number. (e.g., "500")

Figure 2-8: Authentication

16
Mediant 1000
Document #: LTRT-12601