Honda NSA700A 2009 Owner's Manual page 90

LEFT REAR
(4)
(2) helmet holder wire
(3) D-ring
4. Use the helmet holder wire stored in the
tool kit to secure your helmet with your
motorcycle:
Remove the rear seat (page
Route either end of the helmet holder
wire ( ) through the helmet's D-ring
2
( ). 3
(2)
(3)
(4) helmet holder
109 ).
Install the rear seat and lock it
securely.
Remove the helmet holder wire and
store it in the tool kit when it is not
used.
Riding with a helmet attached to
the holder can interfere with the
rear wheel or suspension and
could cause a crash in which you
can be seriously hurt or killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
Basic Operation & Riding
Parking
83