Download  Print this page

Advertisement

Hazard Switch

The hazard switch ( ) should be used only
when the motorcycle is stopped under
emergency or hazardous condition.
To operate it, turn the ignition key to the
ON position, and push the hazard switch.
The front and rear turn signals will blink
simultaneously until you push the switch
again.
All of the turn signals will keep blinking
even after you turn the ignition key to the
OFF position.
1
Controls & Features
If the switch is OFF position for more
than two seconds, and you push the switch
again, the turn signals will not blink.
(1) hazard switch
Instruments & Controls
Switch
position
ON
OFF
(1)
41

Advertisement

Table of Contents

   Also See for Honda NSA700A 2009

Comments to this Manuals

Symbols: 0
Latest comments: