Refer to
Saf ety Precautions
The right side cover must be removed to
check the engine oil level and change the
engine oil, engine oil filter and HFT oil
filter.
Immediately after stopping the engine, the
engine, exhaust pipe and muffler will be
hot. Be careful not to burn yourself.
Removal
1.
By pulling the right side cover ( )
toward you with the notch ( ), pull out
the upper prongs ( ) from the upper
grommets ( ).
4
2.
By pulling up the right side cover, pull
out the lower prong ( ) from the lower
grommet ( ).
6
on page
92
.
1
2
3
5
Right Side Cover Removal
Installation
1.
Align the lower prong with the lower
grommet.
2.
Align the upper prongs with the upper
grommets.
3.
Push the prongs in.
(4)
(6)
(1)
(1) right side cover
(2) notch
(3) upper prongs
Servicing Your Honda
(2)
(3)
(5)
(4) upper grommets
(5) lower prong
(6) lower grommet
111