Display Check
When the ignition switch is turned ON, the
display will temporarily show all the
modes and digital segments. Thereafter,
the speedometer ( ) will show from 130
1
mph to 0 mph (from 200 km/h to 0 km/h
in km/h) and the tachometer ( ) will
sweep to red zone again and go off so that
you can make sure the liquid crystal
display is functioning properly.
The displays are identified in the table on
pages
18
19
with the words:
−
Check.
If any part of these displays does not come
on when it should, have your Honda dealer
check for problems.
Gauge, Indicators & Displays
2
Display
(1) speedometer
(2) tachometer
Instruments & Controls
(2)
(1)
17