Honda NSA700A 2009 Owner's Manual page 211

Hide thumbs Also See for NSA700A 2009:
Table of Contents

Advertisement

If You Have a Flat Tire
2.
Support the motorcycle securely and
raise the front wheel off the ground
using a safety stand or a hoist.
3.
Remove the caliper fixing bolts ( ) and
remove the right and left brake calipers
( ) from the fork legs.
2
To avoid damage to the brake hose
during removal, support the caliper
assembly so that it doesn't hang from
the hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
204
Taking Care of the Unexpected
4.
Loosen the right and left axle pinch
bolts ( ) and remove the front axle bolt
( ).
4
1
RIGHT FRONT
(3) axle pinch bolts
(4) front axle bolt
3
(4)
(3)

Advertisement

Table of Contents
loading

Table of Contents