If A Fuse Blows - Honda NSA700A 2009 Owner's Manual

If a Fuse Blows

All of the electrical circuits on your
motorcycle have fuses to protect them
from damage caused by excess current
flow (short circuit or overload).
If something electrical on your motorcycle
stops working, the first thing you should
check for is a blown fuse.
Determine from the chart on the circuit
fuse box cover which fuse or fuses control
that component. Check those fuses first,
but check all the fuses before looking
elsewhere for another possible cause of
the problem. Replace any blown fuses and
check component operation.
216
Taking Care of the Unexpected
The main fuse is located under the rear
seat.
The HFT fuse is located under the rear
seat.
The circuit fuse box (including spare
fuses) is located under the front seat.
Recommended Fuses
main fuse
HFT fuse
other fuses
1. To prevent an accidental short circuit,
turn the ignition switch OFF before
checking or replacing the fuses.
2. Remove the rear seat (page
40A
10A
10A, 20A, 30A
109 ).