Download  Print this page

Advertisement

OIL-Check Display
If the ignition switch is turned ON while
the motorcycle is on a slope, and it is tilted
up or down to the front, back, or either
side, the engine oil level may not be
accurately detected. This also applies
when the side stand is down and the
ignition switch is ON.
Before you turn the ignition switch ON,
make sure you place your motorcycle in
an upright position on a level surface and
put the side stand up.
Gauge, Indicators & Displays
If you keep riding your motorcycle for
more than 1,553 miles (2,500 km) in the
condition where the engine oil level
cannot be detected properly, the digital
clock changes to the blinking ''OIL'' ( )
display.
If this happens, park in a safe place, turn
OFF the ignition switch, and check the
engine oil level immediately (page
If the engine oil level is low, add engine
oil (page
126
). Then reset the OIL-check
display (page
32
(1) ''OIL''
Instruments & Controls
129
).
(1)
(cont'd)
1
).
31

Advertisement

Table of Contents

   Also See for Honda NSA700A 2009

Comments to this Manuals

Symbols: 0
Latest comments: