Download  Print this page

Advertisement

Final Drive Oil
4.
Remove the oil filler cap ( ).
5.
Check the oil level. It should be flush
with the lower edge of the oil filler hole
( ).
7
6.
If the level is low, check for leaks. Add
the recommended oil through the oil
filler hole until it reaches the lower
edge of the opening.
7.
Install the oil filler cap and tighten to
the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
8.
Install the final gear cover. Tighten the
bolt A and B to the specified torque:
7 lbf·ft (9 N·m , 0.9 kgf·m)
144
Servicing Your Honda
6
(6)
(6) oil filler cap
(7) oil filler inspection hole
(7)

Advertisement

Table of Contents

   Also See for Honda NSA700A 2009

Comments to this Manuals

Symbols: 0
Latest comments: