Lexmark M3150dn User Manual page 81

Understanding the printer menus
Use
Timeouts
Hibernate Timeout
Disabled
20 minutes
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Timeouts
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Timeouts
Screen Timeout
15 sec–300 sec
Timeouts
Prolong Screen Timeout
On
Off
Timeouts
Print Timeout
Disabled
1 sec–255 sec
Timeouts
Wait Timeout
Disabled
15 sec–65535 sec
1
This menu item appears only in touch‑screen printer models.
2
This menu item appears only in non‑touch‑screen printer models.
1
To
Set the time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate mode even if there is an active
Ethernet connection.
Note: Hibernate is the factory default setting.
Set the idle time before the display automatically returns to
Ready state.
Note: 30 seconds is the factory default setting.
Remain in the same location and reset the Screen Timeout
timer instead of returning to the home screen.
Note: Off is the factory default setting.
Set the printer to end a print job after it has been idle for the
specified amount of time.
Notes:
•
90 seconds is the factory default setting.
•
When the timer expires, any partially printed page still in
the printer is printed.
•
Print Timeout is available only when using PCL
emulation.
Set the time the printer waits to receive data from the host.
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation.
81