Weight And Power Consumption; Environmental Specifictaions; Transceiver And Cable Specifications; Rj-45 Connectors - Cisco Network Convergence System 540 Hardware Installation Manual

Appendix

Weight and Power Consumption

For information on physical specifications and power consumption, see the Cisco Network Convergence
System Large Density 540 Routers Data Sheet.

Environmental Specifictaions

For information on environmental specifications, see table Environmental properties for NCS 540 fixed
systems on the Cisco Network Convergence System 540 Large Density Routers Data Sheet.

Transceiver and Cable Specifications

To determine which transceivers and cables are supported by this router, see
Compatibility
To see the transceiver specifications and installation information, see
Upgrade

RJ-45 Connectors

The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil twisted-pair
or unshielded twisted-pair cable from the external network to the following module interface connectors:
• Router chassis
The following figure shows the RJ-45 connector.
Figure 36: RJ-45 Connector

Console Port Pinouts

This following table summarizes the Console port pinouts:
Information.
Guides.
• CONSOLE port
• MGMT ETH port
Cisco Network Convergence System 540 Large Density Routers Hardware Installation Guide
Weight and Power Consumption
Cisco Transceiver Modules
Cisco Transceiver Modules Install and
71