Preparation; Preparation; Component Identifi Cation - Honda Miimo HRM310 Owner's Manual

Component identification
3

PREPARATION

Component identifi cation
Body
Top view
Control panel
Docking station
Supplied items
Transformer
Install the transformer off the ground. After
making all other connections, connect the
transformer to the building's power outlet.
Install in a place not exposed to direct
sunlight and protected from rain.
* It is the responsibility of installer to properly install these supplied accessories according to this manual.
10
Height adjustment dial
Manual STOP button
When you press the
manual STOP button,
the control panel cover
pops up.
Charging plug
Screw
Quantity: 7
Power cord
Connect the power cord to
the transformer and docking
station.
Bottom view
Rear (drive) wheels (2)
The lawn mower recharges at the docking
station, and returns to the docking station
when mowing is fi nished or the battery's
charge becomes low. (You can confi gure
the battery level for returning to the docking
station from 10% to 50%.)
Boundary wire
Lay boundary wire around the area
in which you want the lawn mower to
operate.
Length for HRM310: 656 ft (200 m)
Length for HRM520: 984 ft (300 m)
Charging socket
Front (caster)
wheels (2)
Blade disc
Blades (3)
Carrying area