Page 3 of 13 General Information The FD70CV-M-C-6 is a special mission high-resolution panel mount 7” Widescreen LCD on a pivoting, rotating arm. The LCD features NVG compatibility which can be switched to day or night mode using the rocker switch conveniently located at the top of the display.
Section 21, Category B Installation Instructions All cabin entertainment equipment, such as the FD70CV-M-C-6, should be installed on a non-essential bus and have a dedicated circuit breaker. It is a requirement that a switch be installed in the cockpit so that the pilot can de-energize the entertainment system should it become necessary.
Page 7 of 13 Mounting and Base Information The FD70CV-M-C-6 mates with a standard FDBASE( left); however, FDS Avionics Corp. has various types of bases that maybe more suitable for your aircraft. Below are examples of the FDBASE and FDBASE-W(right, wall mount): The connector seats deeply in the mount, the secure High Density DB15 pin and connector can only be connected one direction.
Page 9 of 13 Operation Instructions The FD70CV-M-C-6 is continuously on but can be de-energized by removing power from the entertainment system. The user can change the video output from the FD70CV-M-C- 6 using the video source select switch on the LCD monitor. When power is applied, the display will turn on and look for a valid input on the last known source.
05/05/2017 MAN – FD70CV-M-C-6 Page 11 of 13 Technical Support Should you have any questions concerning this product or other FDS Avionics Corp. products, please contact our Product Support representatives at 470-239-7421. FDS Avionics Corp. 6435 Shiloh Road Alpharetta, GA 30005...
This warranty is not transferable. Any implied warranties expire at the express limited warranty expiration date. FDS shall not be held liable for any indirect, special, punitive, incidental or consequential damages. Some states do not allow limitation on the length of an implied warranty. In such states, the exclusions or limitations of this limited warranty may not apply.