Chapter 12: Customizing Avaya J129 IP
Setting the Dial mode
About this task
Use this procedure to set the dialing method used to initiate dialing.
Procedure
1. Press Main Menu > Settings > Phone Settings.
2. Use the Down Arrow key to go to the Dial mode screen.
3. Press Change to select one of the following :
• Manual: Press the Call softkey to start a call.
Note:
In the IP Office environment, use the Manual mode.
• Auto: The dialed digits must match the dialplan to start a call.
4. Press Save.
Assigning Speed Dial
About this task
Use this procedure to assign speed dial numbers to your contacts. You can assign up to nine speed
dial entries.
This feature is only available in the Avaya Aura
Procedure
1. Press Main Menu > Settings > Phone Settings.
2. Select Speed Dial.
3. Use the Up and Down Arrow keys to select a Speed Dial number.
4. Press Contacts to select a contact.
March 2017
Phone
®
Using Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
environment.
43