Advertisement
Install the Fork
4A
Find the headset and spacers in the included small
parts box, and the S/M/L sized stem (paired with
seatpost) in the separately-shipped accessory box.
4C
Slide the steerer tube up through the headtube,
taking care to make sure the hoses and housing are
routed correctly.
4B
The headset includes a thin rubber seal that sits on the
lip of the crown race. Install this first, then the lower
bearing (the lower bearing is larger than the upper).
Grease liberally.
*
Pro tip: Zip-tie or toe-strap the fork to the
down-tube to assist during stem/headset assem-
bly.
Note: The cable housing and hoses are routed
past the head tube on the same side as they
come up the down tube - don't cross them under
the downtube!
Advertisement
