Advertisement
Install the Front Light Cont'd
20b
Pedals, Seat, and Air
Install the pedals, drop the bike out of the stand, install the seat and adjust the seat
height, air up the tires and take the bike for a test ride!
Attach the bracket to the mounting eyelets on
the stem using the shorter silver bolt and match-
ing nut. The semi-spherical washers should go
on either side of the eyelets, pointing inwards.
This bolt should be tightened enough that the
light will stay in place if the front end of the bike
is bounced on the ground.
Note: It is possible to flip the stem's faceplate
to lift the light above cargo on the PorterRack.
Advertisement
