Xtracycle EdgeRunner Swoop Assembly Manual page 4

Unboxing the EdgeRunner
1A
• Open the box
• Remove the accessory box from the back of the bike.
• Lift the bike out (team lift recommended) and set it
upright on the floor.
• Pull the seatpost out from the sizing kit, grease the
seat tube and insert the seatpost to the minimum
insert line. Torque the seatpost collar bolt to 5nM.
1B
• Fold the corner of the cardboard block closest to the
seat post back and out of the way, to make room for
the clamp.
• Lift the bike into the stand (team lift recommended)
and clamp it by the seat post.