2.17 Ringer Mute - NEC Dterm DTZ-8R-1 Owner's Manual

Issue 1.0

2.17 Ringer Mute

6-20
The handset remains in Ringer Volume Setting mode for two seconds
❍
unless keys are pressed.
You can use the handset to change the ringer volume while in
NOTE
❍
Incoming Call mode. The ringer volume does not appear on the
display.
If Ringer Volume is off and the handset is on the charger while in
❍
Incoming Call mode, it rings Low, but does not vibrate.
If ringer mute is on, the handset does not ring nor does it vibrate.
❍
Press the TALK key or Speaker key in Ring Volume Setting mode. The
❍
handset cancels the ringer volume setting and goes into Standby
mode.
If the Volume Down key is pressed and held for two seconds while in Standby
mode or Incoming Call mode, the handset sets the ringer mute on, turns on the
Ringer Mute icon and stops the ringer.
To turn the Ringer Mute off, press and hold the Volume Down key for two
seconds; ringer mute is turned off.
Setup and Operation