Table of Contents
Advertisement
3-10
INASET R2 Setup
Microphone On / Off
To turn the INASET R2 built-in microphone On/Off:
On the Home Application window, either press the Mic button on the
Step 1
INASET R2 phone or press the function key for Feature, and press the 1
dial key. The Mic lamp will illuminate when the Microphone is on.
Repeat the previous steps to alternately turn the microphone On/Off as
Step 2
needed.
Handset Receiving Volume
To adjust the Handset receiving volume:
On the Home Application window, press the function key for Feature ,
Step 1
and press the 2 dial key. The display shows the current volume ( Large ,
Small ).
Repeat the previous steps to alternately select between Large and
Step 2
Small Handset receiving volume.
Transmission / Receiving Volume
To permanently change the Handset Transmission/Receiving volume:
On the Home Application window, press the function key for Feature ,
Step 1
and press the 4 dial key. The display shows the current volume ( Large ,
Small ).
Repeat the previous steps to alternately select between Large and
Step 2
Small Handset Transmission/Receiving volume.
Ringer Tones
INASET R2 can be set with four different ringer tones. This can provide a
distinctive ring on your INASET R2 phone. Follow the steps to change
your INASET R2 ringer tone.
On the Home Application window, press the function key for Feature , and
Step
press the 3 dial key. A ringer tone will be heard. Each additional press of
the 3 key will sound a different ringer tone. Stop on the desired ringer tone.
INASET R2 User Guide - Revision 1
Advertisement
Table of Contents
