2.6
2.7
Owner's Manual
Redial (Option)
When the RF link is established between the handset and the base station, you
can press the REDIAL key. The last number dialed is shown and the digits dialed
are sent to the base station.
An error tone is emitted when redial is empty.
❍
Dial limit is 32 digits, redial stores up to 32 digits in memory.
❍
NOTE
Redial data is stored in handset memory (EEPROM).
❍
If F1~F12 keys are pressed, the number dialed before the Function key
❍
is pressed will be stored in redial memory.
Example:
(1) [talk][1][2][3][talk]
(2) [talk][1][2][3]..........[1][2][talk] (over 32 digits) redial: 123......12
(up to 32 digits)
(3) [talk][1][2][3][F1][4][5][6][talk] redial: 123
®
AutoStandby
When the handset is in one of the modes listed below, placing the handset on the
charger changes it to Standby mode. At this time, a confirmation tone is emitted.
Ringer Volume Setting
Menu Setting
Talk Mode
Trying to Connect to the Base Station
redial: 123
Issue 1.0
6-15