Wall Installation; Mounting The Base Directly To The Wall - NEC Dterm DTZ-8R-1 Owner's Manual

Issue 1.0
S 5 W
ECTION ALL
IMPORTANT
5.1
3-4
I
NSTALLATION
The DTZ-8R-1 does not support wall plate mounting.

Mounting the Base Directly to the Wall

Before mounting the telephone, consider the following:
Select a location away from electrical cables, pipes, or other items behind the

mounting location that could cause a hazard when inserting screws into the
wall.
The location must be near a 120Vac power outlet so that the AC power adapter

can reach.
Also consider proximity to the PBX (key system) so that the telephone line cord

will not be excessively long.
Make sure the wall material is capable of supporting the weight of the base unit.

Use #10 screws with anchoring devices suitable for the wall material where the

base unit will be placed.
To mount the telephone:
1. Insert two mounting screws 3-15/16" apart. Allow 3/16" between the
wall and screw heads for mounting the telephone.
Figure 3-3 Inserting Screws into the Wall for Wall Mounting the Telephone
Installation