Ringer Mute - NEC Dterm DTL-8R-1 Owner's Manual

Document Revision 1
___________________________________________________________________________________
2.15
___________________________________________________________________________________
6 - 14
The Ring volume changes as follows.
The Handset keeps the Ringer Volume Setting Mode for two seconds without
key operation.
When the Ringer Volume is Off (Vibrate), the Handset vibrates instead of
ringing.
If Ringer Volume is off and the Handset is on the charger while in Incoming
Call Mode, it rings Low, but does not vibrate.
If ringer mute is on, the Handset does not ring nor does it vibrate.
Press the TALK key or Speaker key in Ring Volume Setting Mode. The
Handset cancels the ringer volume setting and goes into Standby Mode.
The handset can change ringer volume in Incoming Call Mode. In this case,
the ringer volume does not appear on the display.

Ringer Mute

If the Volume Down key is pressed and held for two seconds while in Standby
Mode or Incoming Call Mode, the Handset sets the ringer mute on, turns on
the Ringer Mute icon and stops the ringer.
To turn the Ringer Mute off, press and hold the Volume Down key for two
seconds; ringer mute is turned off.
term
D Cordless DECT
Setup and Operation