High End Systems Uno User Manual page 28

4. Program selection for Edit Program
• Select "Edit program" by turning the encoder.
• Press the Enter button to confirm.
• Select "Edit program" by turning the encoder.
• Press the Enter button to confirm.
• Turn the encoder to select the desired program. With this function you can edit specific scenes into a specific program.
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main menu.
5. Automatic Scene Recording
• Select "Edit program" by turning the encoder.
• Press the Enter button to confirm.
• Select "Edit scenes" by turning the encoder.
• Turn the encoder to select the desired scene numbers. You can program a maximum number of 250
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main menu.
Example:
Program 2 includes scenes: 10, 11, 12, 13
Program 4 includes scenes: 8, 9, 10
Program 6 includes scenes: 12, 13, 14, 15
Auto Pro Part 1 is Program 2;
Auto Pro Part 2 is Program 3;
Auto Pro Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture:
28