High End Systems Uno User Manual page 22

3．
4．
Clr Last Run
With this function, you can clear last run time of the fixture. The display shows "ON" or "OFF", Press "Enter" to
confirm.
1.
displayed. Press< ENTER>, the display will show "Info". Tap the <Up/Down>button until the display
will show "Time Info.". Press ENTER, the display will show "Time Info.".
2.
3.
"Clr Last Run".
4.
5.
LED Time PIN
With this function, you can display the timer password. The time password is 038.
1．
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display will
show "Time Info.". Press ENTER, the display will show "Time Info.".
2．
3．
4．
Clen LED Time
With this function you can clear the running time of the lamp. Please clear the lamp time every time you replace
the lamp.
1．
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display will
show "Time Info.". Press ENTER, the display will show "Time Info.".
2．
3．
"Clen LED Time",
4．
5．
Value Disp.
NONE
With this function, you can choose the DMX channel.
1．
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display will
show "Value Disp". Press ENTER, the display will show "Value Disp".
2．
3．
4．
DMX Value
With this function you can display the DMX 512 value of each channel. The display automatically shows the
channel with a value changing.
1．
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display will
show "Value Disp". Press ENTER, the display will show "Value Disp".
2．
3．
4．
Head Temperature
With this function you can display the temperature on the display board of the base (near CMY-filter) in Celsius.
1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Info" is
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until " Head Temp." is
displayed. Press ENTER, the display will show "Head Temp.".
2. The display show "XXX °C/ °F".
3. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Press <ENTER> the display will show "Timer PIN", the time password is 038.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Info" is
Press <Up/Down>;, the display will show "Clr Last Run".
At" L-Timer Password" menu input right password, Press<ENTER>;, the display will show
The display show "OFF", Press <Up/Down> the display will show "ON".
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Info" is
Press <Up/Down> the display will show "LED Time PIN".
Press<ENTER> the display will show "LED Time PIN", the time password is 038.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Info" is
Press <Up/Down> the display will show "Clen LED Time".
At "Timer Password "menu input a correct password, press <ENTER> the display will show
The display will show "OFF"or"ON".
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until "Info" is
Press <Up/Down> the display will show "NONE".
Press<ENTER> the display will show "NONE".
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until "Info" is
Tap the <Up/Down>button until "ALL", "PAN" is displayed.
Tap the <Up/Down>button, choose each channel.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
22