Preset Programming And Playback - High End Systems Uno User Manual

Preset Programming and Playback

Preset
Play Back
DMX Control
Set To Slave
With this function, you can define the device as slave.
Auto Program
With this function, you can run the internal program. You can select the desired program under "Select prog.".
You can set the number of steps under "Edit prog.". You can edit the individual scenes under "Edit scenes".
With this function, you can run the individual scenes either automatically, i.e. with the adjusted Step-Time.
Select programs
With this function, you can select the program for the Program Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal programs.
Scenes Input
The moving head features an integrated DMX-recorder by which you can transmit the programmed scenes from your
DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to). When you call up the
scenes at your controller, they will automatically be transmitted to the moving head.
1. Tap <MODE/ESC>button, access the main menu Tap the&<Up/Down>button until "
Preset" is displayed. Press ENTER, the display will show "Preset". Tap the <Up/Down>button until
the display will show "PlayBack". Press ENTER, the display will show "PlayBack".
2． Tap the <Up/Down>button until "DMX Control" is displayed.
3． Press ENTER, the display will show "DMX Control".
4． Tap the <Up/Down>button, choose DMX modes.
5． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
1． Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until "
Preset" is displayed. Press ENTER, the display will show "Preset". Tap the <Up/Down>button until
the display will show "PlayBack". Press ENTER, the display will show "PlayBack".
2． Tap the <Up/Down>button until "Set To Slav" is displayed
.3． Press ENTER, the display will show "Set To Slav".
4． Tap the <Up/Down>button, the display will show "Slave1", "Slave2", "Slave3".
5． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
1． Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until "
Preset" is displayed. Press ENTER, the display will show "Preset". Tap the <Up/Down>button until
the display will show "PlayBack". Press ENTER, the display will show "PlayBack".
2． Tap the <Up/Down>button until "Auto Program" is displayed.
3． Press ENTER, the display will show "Auto Program"
4． Tap the <Up/Down> button, the display will show "Master1", " Alone".
5． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
26