High End Systems Uno User Manual page 25

1． Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Test" is
displayed. Press ENTER, the display will show "Test".
2． The display show "Reset All", Press <Up/Down> the display will show "Reset Pan & Tilt".
3． Press <ENTER>; to confirm or press <MODE/ESC>; to return to the main menu.
Test channel
With this function you can test each channel on its (correct) function.
1． Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Test" is
displayed. Press ENTER, the display will show "Test".
2． Press <Up/Down> the display will show "Test Channel".
3． Press<ENTER> the display will show "Test Channel".
4． The display show "Pan Moving "first channel, Press <Up/Down> can choose other channel.
5． Press <ENTER>; to confirm or press <MODE/ESC>; to return to the main menu
Manual control
With this function, you can adjust the lamp more easily. All effects will be canceled, the shutter opens and the dimmer
intensity will be set to 100 %. With the individual functions, you can focus the light on a flat surface (wall) and perform the
fine lamp adjustment.
1． Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Test" is
displayed. Press ENTER, the display will show "Test".
2． Press <Up/Down> the display will show "Manual Ctrl.".
3． Press<ENTER> the display will show "Manual Ctrl.".
4． The display show "PAN=XXX".
5． Press <ENTER>; to confirm or press <MODE/ESC>; to return to the main menu.
Calibration
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password of calibrate
values is 050.
1． Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button until " Test" is
displayed. Press ENTER, the display will show "Test".
2． Press <Up/Down> the display will show "Calibration".
3． Press<ENTER> the display will show "Calibration".
4． The display show "Password=XXXX".
5． Press<ENTER>; to confirm or press <MODE/ESC>; to return to the main menu.
25