Lcd Harness/Digitizer Harness/Wireless Lan Antenna Cable - Toshiba Satellite R10 Maintenance Manual

4 Replacement Procedures 4.29 LCD/digitizer harness & Wireless LAN antenna cables
7. Remove the LCD harness ground plate from the display cover.
8. Remove the following screws and LCD harness hold plate from the display
cover.
M2.5x6.0B
?
9. Remove the following screws securing the hinge assembly.
M2.5x6.0B
?
10. Detaching the hinge assembly from the display cover, remove the hinge cap from
the hinge assembly.
LCD harness
hold plate
Hinge cap
11. Pull out the LCD harness through the hole of hinge assembly.
12. Pull out the digitizer harne ss through the hole of hinge assembly
13. Pull out the wireless LAN antenna cables through the hole of hinge assembly
14. Peel off the wireless LAN antennas and remove them from the display cover.
Satellite R10 Maintenance Manual (960-509)
FLAT BIND screw
FLAT BIND screw
M2.5x6.0B FLAT BIND
Figure 4-44 Removing the hinge assembly
x2
x2
LCD harness ground plate
M2.5x6.0B FLAT BIND
4-65