4 Replacement Procedures
specified style in document.
4.14
Display Assembly
Removing the Display Assembly
CAUTION:
Use care to avoid the antenna cable being caught between the display assembly and the
laptop.
Remove the display assembly according to the following procedures and Figure 4-19.
1. Peel away the tape securing the two antenna cables (black and white) and the LVDS cable,
and pull the cables from the routing channels on the logic lower assembly.
2. Remove the two M2.5×6 screws securing the display assembly.
3. Remove the display assembly from the logic lower assembly.
4-36
Error! No text of specified style in document. Error! No text of
M2.5×6*2
Figure 4-19 Removing the screws
Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]