Mini Displayport Connectors; Figure 20. Location Of The Mini Displayport Connectors - VersaLogic VL-EBX-38 Hardware Reference Manual

Viper intel atom-based single board computer with dual ethernet, video, usb, sata, serial i/o, digital i/o, analog i/o, trusted platform module security, counter/timers, mini pcie, msata, pc/104-plus interface, spx.
Hide thumbs Also See for VL-EBX-38:
Table of Contents

Advertisement

Mini DisplayPort Connectors

The Mini DisplayPort connectors J3 and J30 both support resolutions up to 2560 x 1440 at 24-
bit.
DisplayPort consists of three interfaces:
Main Link – transfers high-speed isochronous video and audio data
Auxiliary channel – used for link management and device control; the EDID is read over
this interface
Hot Plug Detect – indicates that a cable is plugged in
Connector J3 DisplayPort interface also supports:
Audio signaling (Audio is disabled by default in BIOS Setup so it would need to be
enabled before use.)
DP++ mode allowing connection to an HDMI device through a passive adapter.
"Passive" means that the adapter does not require external power (because it uses the DP
port's 3.3 V power) and it does not require software drivers.
The figure below shows the locations of the 20-pin Mini DisplayPort connectors. Table 20 lists
the pinout of the J3 Mini DisplayPort0 connector and J30 Mini DisplayPort1 connector.

Figure 20. Location of the Mini DisplayPort Connectors

EBX-38 Hardware Reference Manual
Video Interfaces
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

ViperVl-ebx-38ecpVl-ebx-38ebp

Table of Contents