VersaLogic VL-EBX-38 Hardware Reference Manual page 18

1. Install Memory

Insert the DDR3L DRAM module into the SO-DIMM socket on the top side of the board
and latch it into place. If you have an EBP or ECP SKU of the EBX-38, you may install a
matching DDR3L DRAM module into the SO-DIMM socket on the bottom side of the
board as well.
2. Attach Cables and Peripherals

Plug the VGA cable VL-CBR-1204 into socket J5. Attach the cable to a VGA display.
(Alternatively, you can attach a DisplayPort-enabled display to the Mini DisplayPort
connectors at J3 or J30, or remove jumper V9 and connect J33 for LVDS panel (see
jumper settings for LVDS resolutions).)

Plug the VL-CBR-4005B paddleboard into socket J4.

Plug a USB CD-ROM drive, USB keyboard, and USB mouse into any of the USB
connectors of the CBR-4005B paddleboard.

Plug the SATA data cable VL-CBR-0702 into socket J2 or J36. Attach a hard drive to
the connector on the cable.

Attach the SATA power adapter cable VL-CBR-0401 to the ATX power supply and
SATA drive.

Optionally, attach a LAN cable to either of the Ethernet connectors at J1 or J7 on the
EBX-38.
3. Attach Power

Plug the power adapter cable CBR-2022 into connector J20. Attach the motherboard
connector of the ATX power supply to the adapter.

Verify that the V10 jumper is selecting 5V (installed on pins 1 and 2).
4. Review Configuration

Before you power up the system, double-check all the connections. Make sure all cables
are oriented correctly and that adequate power will be supplied to the VL-EBX-38 and
peripheral devices.
5. Power On

Turn on the ATX power supply and the video monitor. If the system is correctly
configured, a video signal should be present.
6. Select a Boot Drive

During startup, press <CTRL> <B> to display the boot menu. Insert the OS installation
CD in the CD-ROM drive and select to boot from the CD-ROM drive.
7. Install Operating System

Install the operating system according to the instructions provided by the operating
system manufacturer. (See Operating System Installation on page 13.)
EBX-38 Hardware Reference Manual
Configuration and Setup
8