Supermicro SUPERSERVER 4028GR-TR User Manual page 94

SuperServer 4028GR-TR(T)(2) User's Manual
Fatal Err Over (Fatal Error Overwrite)
This item configures the option to overwrite fatal errors. The options are Disable
and Enable.
Non-Fatal Err Over (Non-Fatal Error Overwrite)
This item configures the option to overwrite non-fatal errors. The options are
Disable and Enable.
Corr Err Over (Correctable Error Overwrite)
This item configures the option to overwrite correctable errors for ECC memory.
The options are Disable and Enable.
L0s Support
This item configures the option to enable support for the L0s PCI-E link state
(non supported in this motherboard). The only available option is Disable.
Socket 0 PcieD00F0 - Port 1A/Port 2A/Port 3A
PCI-E Port
Select Enable to enable a PCI-E port specified by the user. Select Disable to
de-activate a PCI-E port specified by the user. Select Auto for the BIOS ROM
to automatically discard a PCI-E port specified by the user when there is no
HP-compatible device connected to this port or when there is no error detected
in this port. The options are Auto, Enable, and Disable.
Hot Plug Capable
Use this feature to enable or disable hot-plug support for a port specified by the
user. The options are Disable and Enable.
PCI-E Port Link
Use this feature to disable the physical link connected to a PCI-E port specified
by a user so that no training will take place on the component-level while the
PCI-E configuration commands are still in full force. The options are Enable
and Disable.
Link Speed
Use this item to configure the link speed of a PCI-E port specified by the user.
The options are Auto, Gen 1 (Generation 1) (2.5 GT/s), Gen 2 (Generation 2)
(5 GT/s), and Gen 3 (Generation 3) (8 GT/s).
PCI-E Port DeEmphasis
This item configures the De-Emphasis Control (LANKCON2 [6]) setting for this
computer. The options are -6.0 dB and -3.5 dB.
7-10