Supermicro SUPERSERVER 4028GR-TR User Manual page 117

Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text
messages to a remote server. The options are Disabled and Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are
Disabled and Enabled.
Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console
Redirection for legacy OS support. The options are 80x24 and 80x25.
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a
terminal emulator designed for the Windows OS. The options are VT100, LINUX,
XTERMR6, SCO, ESCN, and VT400.
Redirection After BIOS Post
Use this feature to enable or disable legacy Console Redirection after BIOS
POST (Power-On Self-Test). When this feature is set to BootLoader, legacy
Console Redirection is disabled before booting the OS. When this feature is
set to Always Enable, legacy Console Redirection remains enabled upon OS
boot. The options are Always Enable and BootLoader.
Legacy Console Redirection Settings
Legacy Serial Redirection Port
Use this item to configure redirection for legacy serial ports. The options are
COM1 and SOL/COM2.
Serial Port for Out-of-Band Management / Windows
Emergency Management Services (EMS)
The submenu allows the user to configure Console Redirection settings to support
Out-of-Band Serial Port management.
Console Redirection
Select Enabled to use a COM port selected by the user for EMS Console
Redirection. The options are Disabled and Enabled.
*If the item above set to Enabled, the following items will become available for
user's configuration:
7-33
Chapter 7: AMI BIOS