Supermicro SUPERSERVER 4028GR-TR User Manual page 109

Port 0-Port 3 Hot Plug
Select Enabled to support Hot-plugging for the selected SATA port which will
allow the user to replace a device without shutting down the system. The
options are Disabled and Enabled.
sSATA Port 0-Port 3 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a
COMRESET initialization to the device. The options are Disabled and Enabled.
Port 0-Port 3 sSATA Device Type
Use this item to specify if the sSATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive and Solid State Drive.
Server ME (Management Engine) Configuration
This feature displays the following system ME configuration settings.
•
Operational Firmware Version
•
Recovery Firmware Version
•
ME Firmware Features
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
Altitude
This feature indicates the altitude of the platform this machine is located above the
sea level. The value is shown in meters. If the value is unknown, enter the number
"80000000."
MCTP (Management Component Transport Protocol) Bus Owner
This feature indicates the location of the MCTP Bus owner. Enter 0s to all fields to
disable the MCTP Bus owner.
7-25
Chapter 7: AMI BIOS