Supermicro SUPERSERVER 4028GR-TR User Manual page 105

the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are Disabled and Enabled.
SATA Port 0-Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0-Port 5 Hot Plug
Select Enabled to support Hot-plugging for the selected SATA port which will
allow the user to replace a device without shutting down the system. The options
are Disabled and Enabled.
Port 0-Port 5 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to initialize the
device. The options are Disabled and Enabled.
Port 0-Port 5 SATA Device Type
Use this item to specify if the SATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive and Solid State Drive.
*If the item above "Configure SATA as" is set to IDE, the following items will
display:
SATA Port 0-Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0-Port 5 SATA Device Type (Available when a SATA port is detected)
Use this item to specify if the SATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive and Solid State Drive.
7-21
Chapter 7: AMI BIOS