Technical Data; Service / Warranty - Gardena ComfortCut 450/25 Operating Instructions Manual

8. Technical Data

Turbotrimmer
Motor power consumption
Mains voltage / mains frequency 230 V / 50 – 60 Hz
Filament thickness
Cutting width
Filament supply
Filament feed
Rpm of filament cassette
Weight
Telescopic adjustment
of the turn handle
Workplace­related
emission values L 1)
pa
Uncertainty k
pa
Noise level L 2)
WA
Uncertainty k
WA
Hand / arm vibration a
Uncertainty k
a
Measuring process complying with
has been measured according to a standardised test procedure and can be used for comparison of one electric power tool with another.
It can also be used for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric
power tool.

9. Service / Warranty

Service:
Please contact the address on the back page.
Warranty:
In the event of a warranty claim, no charge is lev-
ied to you for the services provided.
GARDENA Manufacturing GmbH offers a two-
year warranty (effective as of the date of pur-
chase) for this product. This warranty includes all
significant defects of the product that can be
proved to be material or manufacturing faults.
This warranty is fulfilled by supplying a fully func-
tional replacement product or by repairing the
faulty product sent to us free of charge; we
reserve the right to choose between these
options. This service is subject to the following
provisions:
• The product was used for its intended purpose
as per the recommendations in the operating
instructions.
20
ComfortCut 450/25
(Art. No. 9808)
450 W
1.6 mm
250 mm
6 m
Tip mechanism
approx. 12,800 rpm
approx. 3.3 kg
approx. 24 cm
84 dB (A)
3 dB (A)
measured 93 dB (A) /
guaranteed 94 dB (A)
1 dB (A)
3) 2
< 2.5 m/s
vhw
1.5 m/s²
1) 2)
DIN EN 60335-2-91 RL2000/14/EG
ComfortCut Plus 500/27
(Art. No. 9809)
500 W
230 V / 50 – 60 Hz
1.6 mm
270 mm
6 m
Tip mechanism
approx. 12,200 rpm
approx. 3.3 kg
approx. 24 cm
83 dB (A)
3 dB (A)
measured 94 dB (A) /
guaranteed 96 dB (A)
2 dB (A)
2
< 2.5 m/s
1.5 m/s²
3)
DIN EN 786. The stated vibration emission value
• Neither the purchaser nor a third party has
attempted to repair the product.
This manufacturer's warranty does not affect
warranty entitlements against the dealer / retailer.
If problems arise with this product, please
contact our Service department or send the
defective product along with a brief description
of the fault to GARDENA Manufacturing GmbH,
making sure to have sufficiently covered any
shipping costs and to have followed the
relevant postage and packaging guidelines.
A warranty claim must be accompanied by
a copy of the proof of purchase.
Consumables:
The filament cassette and cassette cover
are consumables and are not covered by the
guarantee.
PowertCut Plus 650/30
(Art. No. 9811)
650 W
230 V / 50 – 60 Hz
2.0 mm
300 mm
4 m
Tip mechanism
approx. 10,500 rpm
(Idle speed
approx. 9,500 rpm)
approx. 3.6 kg
approx. 24 cm
83 dB (A)
3 dB (A)
measured 93 dB (A) /
guaranteed 96 dB (A)
3 dB (A)
2
< 2.5 m/s
1.5 m/s²