Operation - Gardena ComfortCut 450/25 Operating Instructions Manual

4. Operation

DANGER!
Connecting the trimmer:
w
e
t
r
Setting the working position:
z
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v Never bypass the safety devices or switches (e. g. by tying
the start button to the handle).
Risk of injury!
v Unplug the mains plug of the Turbotrimmer prior to each
adjustment of the working position, to the shaft length,
additional handle or plant guard!
1. Insert the loop of the extension cable
e
relief from below through the handle
2. Plug the plug
extension cable
3. Plug the extension cable into a 230 V mains power supply.
q
Working position 1:
Standard trimming
Working position 1:
For standard trimming.
Working position 2:
1. Press the foot pedal
desired working position.
2. Release the foot pedal
CAUTION! Avoid contact between the ground and the trimmer
head in working position 1 + 2.
r
of the trimmer into the socket
q
.
Working position 2:
Trimming beneath
obstacles
z
and lower the shaft downwards into the
z
and allow the shaft to engage.
q
into the cable strain
w
and pull tight.
t
of the
Working position 3:
Vertical trimming
of overhanging lawn
edges
15