Assembly - Gardena ComfortCut 450/25 Operating Instructions Manual

Turbotrimmer 9808;9809;9811
Hide thumbs Also See for ComfortCut 450/25:
Table of Contents

Advertisement

Do not use your Trimmer if the power cord is
damaged.
v If the mains cord or extension cable is
damaged while you are working, unplug
the mains plug immediately.
Do not touch the cable until the mains
plug is switched off.
Supply lines must be lighter than:
– common rubber lines (H 05 RNF),
if rubber-insulated;
– common PVC-coated lines (H 05 WF),
if insulated with PVC.
Only connect the device to a mains circuit which
is equipped with a residual current device (RCD)
with a maximum release current of 30 mA.

3. Assembly

Assembling the trimmer:
2
1
ß
R
4
3
8
7
9
6
5
14
In Switzerland the use of a residual-current
device is obligatory.
Warning! This unit makes an electromagnetic
field while it operates. This field may under some
conditions interfere with active or passive medi-
cal implants. To decrease the risk of conditions
that can possibly injure or kill, we recommend
persons with medical implants to speak with
their physician and the medical implant manu-
facturer before operating.
Warning! Keep toddlers away when you assem-
ble the unit. Small parts can be easily swal-
lowed. There is also a risk that the polybag can
suffocate toddlers.
CAUTION!
The trimmer may only be operated provided that the
protective cover
1
1. Pull the lock
belonging to the
2
additional handle
3
of the snap-fits
belonging to the
2
additional handle
ß
grooves
pointing forwards, snap
R
them into the holder
2. Place both halves of the impeller
around the lower groove
7
trimmer head
and close until
they audibly engage.
3. From the front, push the plant
8
guard
into the upper groove
of the trimmer head
so, ensure that the installed bow
can rotate freely (i. e. insert the
bow with the kink pointing
upwards).
4. Place the protective cover
top of the trimmer head
5. Turn the protective cover
can be pushed over the trimmer
head entirely (the two arrows
are directly across from each
other).
6. Rotate the protective cover
clockwise until it audibly engages.
0
is assembled.
, push in both
and, with the
4
.
5
6
of the
ß
A1
9
7
. In doing
0
on
7
.
0
until it
ß
ß
,
A1
A2
0
anti-
ß
A2
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powercut plus 650/30Comfortcut plus 500/27

Table of Contents