9.
Install the bottom access panel.
10. Mount the gateway on page 11.
11. Power up the gateway on page 10.
Installing the full-length WiFi/WLAN module
Procedure
1. Power down the gateway on page 10.
2. Dismount the gateway on page 12.
CAUTION:
DO NOT remove the top access panel under any circumstance. Removing the top access panel
can harm the heatsink or void the warranty to the equipment.
3. Remove the bottom access panel on page 13.
4. Remove the drive tray on page 14.
5. Using a T-10 Torx screwdriver, install the full-length WiFi module with the two screws.
26
Installing the full-length WiFi/WLAN module